Harman Convection / Distribution Blower (3-21-47120)

Replacement convection / distribution blower for Harman pellet stoves. This part measures 11-1/4" wide and 4-3/8" tall from the bottom of the housing to the top of the grounding screw. Fits the following models:

NOTE: This blower was updated from the 2 wire style to the 4 wire design currently pictured because some newer units have a 3 speed blower which uses the additional wires. If the blower you are replacing was a two wire blower, you will need to crimp back or clip off the red and blue wires, using the black and white wires only for the installation. If you have an earlier model that does not use a blower housing, this is still the correct motor. You will need to disconnect the motor from the housing and install just the motor to your stove.

Harman Pellet Stoves:

• Accentra Insert
• Invincible Insert - We have conflicting information from Harman about serial number ranges on the Invincible Insert which this fits. Before ordering this part please remove your old blower and double check that this motor will fit.
• Super Mag Stoker

Harman part # 3-21-47120

May fit other models, please check your owner's manual for part number compatibility.